Flagpoles

  • Diagram of a lightning protection system installed in the ground. The system includes a spun aluminum ball on top, cast aluminum revolving truck, one halyard, swivel snaps with covers, cast aluminum cleat, aluminum flash collar, and foundation sleeve in the ground.

    Atlas Series Flagpole

    External Halyard Ground Set Cone Tapered Aluminum Flagpoles.

    STANDARD ACCESSORIES

    • Gold anodized aluminum ball ornament

    • Cast aluminum revolving truck with pulley

    (ECSA20 & ECSA25 poles have a stationary truck as standard)

    • Solid braided polypropylene halyard

    • Swivel flag snaps w/vinyl snap covers

    • Cast aluminum cleat with mounting screws

    • Spun aluminum flash collar

    • Galvanized steel foundation sleeve

    Call for Pricing and availability 616-540-3062

    20’ up to 60’ available in satin, clear, bronze, or black finishes.

  • Diagram showing the components of a grounded antenna mast, including a spun aluminum ball, cast aluminum rotating truck, with two halyards, swivel snaps with covers, cast aluminum cleat, aluminum flash collar, 3000 PSI concrete foundation, dry tamped sand, hardwood wedges, steel centering wedges, foundation sleeve, support plate, steel base plate, and lightning ground spike.

    Architectural Flagpole

    STANDARD ACCESSORIES

    • Gold anodized aluminum ball ornament

    • Cast aluminum revolving truck w/pulley

    • Solid braided polypropylene halyard

    • Swivel flag snaps w/vinyl snap covers

    • Cast aluminum cleat with mounting screws

    • Spun aluminum flash collar

    • Galvanized steel foundation sleeve

    Call for pricing and availability 616-540-3062

    20’ up to 80’ available in satin, clear, bronze, or black finishes.

  • Diagram of a lightning ground rod showing components such as a steel base plate, steel guiding wedges, support plate, foundation sleeve, aluminum flash collar, steel centering wedges, support plate, and lightning ground spike. The grounds and other parts are labeled.

    Hurricane Flagpole

    External Halyard Ground Set Cone Tapered Aluminum Flagpoles.

    STANDARD EXTERNAL POLE ACCESSORIES

    • Gold anodized aluminum ball ornament

    • Cast aluminum revolving truck w/pulley

    • Solid braided polypropylene halyard

    • Swivel flag snaps w/vinyl snap covers

    • Cast aluminum cleat with mounting screws

    • Spun aluminum flash collar

    • Galvanized steel foundation sleeve

    This flagpole is ideal for a location were wind speeds reach 150mph +

    Call for pricing and availability 616-540-3062

    25’ up to 50’ available in satin, clear, bronze, or black finishes.

  • A diagram of a lightning rod showing its components including a steel base plate, foundation sleeve, steel pointing wedge, lightning ground spike, support plate, steel centering wedges, concrete, hardwood wedges, aluminum flash collar, two cleats, second cleat and halyard available upon request, a halyard cover, a cast aluminum cleaving truck, a spun aluminum ball at the top, and support cords with covers.

    Economy Extra Flagpole

    External Halyard Ground Set Cone Tapered Aluminum Flagpoles

    STANDARD ACCESSORIES

    • Gold anodized aluminum ball ornament

    • Cast aluminum revolving truck w/pulley

    • Solid braided polypropylene halyard

    • Swivel flag snaps w/vinyl snap covers

    • Cast aluminum cleat with mounting screws

    • Spun aluminum flash collar

    • Galvanized steel foundation sleeve

    Call for pricing and availability 6165-540-3062

    20’ up to 70’ available in satin, clear, bronze, or black finishes.

  • Diagram of a lightning rod showing the aluminum ball at the top, mounted on a stationary truck, with a flag, aluminum cleat, flash collar, and foundation components extending into the ground with concrete, tamped sand, and wooden wedges.

    Special Budget Flagpole

    External Halyard Ground Set Cone Tapered Aluminum Flagpoles

    STANDARD ACCESSORIES

    • Gold anodized aluminum ball ornament

    • Cast aluminum stationary truck w/pulley

    (ECS35 has a revolving truck as standard)

    • Solid braided polypropylene halyard

    • Cast aluminum cleat with mounting screws

    • Metal swivel flag snaps w/vinyl covers

    • Flash collar not included as standard equipment for this series

    • PVC foundation sleeve (ECS30 & ECS35 poles have a galvanized steel sleeve as standard

    Call for pricing and availability 616-540-3062

    15’ up to 35’ satin, clear, bronze, or black finishes.

  • Diagram of a concrete foundation installation with equipment and components labeled, including a cast aluminum revolving truck, cable assembly, flag arrangement, counterweight, beaded retainer ring, aluminum flash collar, M-Winch system, concrete foundation, dry tamped sand, hardwood wedges, foundation sleeve, steel base plate, support plate, steel centering wedges, and lightning ground spike.

    Deluxe IH Flagpole

    Internal Halyard Ground Set Cone Tapered Aluminum Flagpoles.

    These internal halyard flagpoles contain a winch mounted inside the flagpole shaft, operable only with a removable crank handle. As the stainless-steel cable unwinds from the winch, it passes up through the inside of the flagpole shaft, over the truck sheave to the outside of the shaft, where the retainer ring provides a sliding anchor. A counterweight, heavily coated with neoprene, attached to the retainer ring, allows the halyard to be lowered for fastening or removing the flag. The winch is gearless and self-locking at any point, eliminating the need for a separate brake. This direct drive winch provides rapid raising and lowering of the flag with little effort. This design does not require any welding, thus avoiding discoloration when an anodized finish is desired. No monthly lubrication is needed, and this winch system is easily adaptable to existing on-site flagpoles

    STANDARD ACCESSORIES

    • Cast aluminum revolving truck with

    enclosed stainless-steel bearings and raceway

    • Stainless Steel Cable Assembly

    • Deluxe Flag Arrangement

    • Retainer ring and counterweight

    • M-Winch System

    • Spun aluminum flash collar

    • Galvanized steel foundation sleeve

    • Choose optional ornaments

    Call for pricing and availability 616-540-3062

    20’ up to 80’ available in satin, clear, bronze, or black finishes.

  • A diagram of a lightning protection system showing components like a spun aluminum ball, cast aluminum stationary truck, wire center halyard, swivel snaps with covers, quick link, counterweight, beaded retainer ring, removable flush-mounted access door, cylinder lock, and cam action cleat with sheave.

    Vangaurd Flagpole

    Internal Halyard Ground Set Cone Tapered Aluminum Flagpoles.

    The Vanguard series provides an intelligent, economical alternative to deluxe concealed halyard systems.

    * Flagpole models available in both one and two section styles; please specify when placing your order. Single section pole(s) will be shipped if not specified.

    ♦ 5" diameter poles supplied with a hinged access door and frame unit. 6" and larger diameter poles supplied with a removable flush-mounted access door for added strength.

    5" POLES 6" POLES 7-8" POLES

    STANDARD ACCESSORIES

    • Gold anodized aluminum ball ornament

    • Cast aluminum revolving

    truck on all flagpole models

    • Nylon wire center halyard

    • Swivel flag snaps w/vinyl snap covers

    • Retainer ring and counterweight

    • Stainless steel quick link

    • Cam action cleat (accessible behind a lockable access door)

    • Spun aluminum flash collar

    • Galvanized steel foundation sleeve

    Call for pricing and availability 616-540-3062

    20’ up to 40’ satin, clear, bronze, or black finishes.

  • Diagram of a weather satellite antenna with labeled parts including spun aluminum ball, cast aluminum revolving truck, three halyards, swivel snaps with vinyl covers, and three cast aluminum cleats.

    Single Mast Nautical with Yardam

    External Halyard Ground Set Cone Tapered Aluminum Flagpoles.

    STANDARD ACCESSORIES

    • Gold anodized aluminum ball ornament

    • Cast aluminum revolving truck w/pulley

    • Aluminum yardarm with pulleys & mounting hardware

    • 3 lengths of solid braided polypropylene halyard

    • Swivel flag snaps w/vinyl snap covers

    • 3 cast aluminum cleats with mounting screws

    • Spun aluminum flash collar

    • Galvanized steel foundation sleeve

    Call for pricing and availability 616-540-3062

    20’ up to 45’ satin, clear, bronze, or black finishes.

  • A streetlight attached to a brick wall with a pole extending upward, topped with a yellow globe light. The streetlight is secured to the wall with brackets and has wires connected at the top.

    Vertical Wall Mount Flagpole

    External Halyard Cone Tapered Aluminum Flagpoles.

    STANDARD ACCESSORIES

    • Gold anodized aluminum ball ornament

    • Cast aluminum revolving truck on 5" & 6" diameter poles; all others have a stationary truck as standard

    • Cast aluminum cleat with mounting screws

    • Solid braided polypropylene halyard

    • Swivel flag snaps with vinyl covers

    • Cast aluminum mounting brackets

    • If thru wall bolts are required, please

    advise length of bolt needed.

    Call for pricing and availability 616-540-3062

    8’ up to 35’ satin, clear, bronze, or black finishes.